Pulsefire Haste 2 Pro

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

The Pulsefire Haste 2 Pro is supported with Windows Dynamic Lighting (WDL). Windows Dynamic Lighting (WDL) in Windows 11 allows lighting control outside of NGENUITY. Please refer to WDL documentation for supported effects.

If you happen to get a replacement USB dongle and don't know how to pair, follow the steps below! Select 2.4G for the connection type. Hold the Left Mouse Button & Right Mouse button + DPI Button at the same time until the mouse flashes Orange. Unplug/Plug in the USB dongle into your system. You wil

The mouse can’t operate on Bluetooth and 2.4G simultaneously, as the power switch allows only one connection mode at a time. However, you can use both Bluetooth and 2.4G on different computers. Pairing information for Bluetooth is saved and will auto-connect once in BT power mode. When switching bet

Does the Haste 2 Pro support NVIDIA Reflex? Currently, NVIDIA Reflex supports only the 1000Hz polling rate in 2.4G mode.

What is the mouse skate material? PTFE (Polytetrafluoroethylene).

1. Switch the power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell in an upward motion. 4. Locate and remove the battery secured wit

Pulsefire Haste 2 Quick Start Guide

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.

You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment