Cloud III S Wireless

Slide the mode switch to the Bluetooth icon. Press and hold the Power and Multifunction buttons for 2 seconds to enter Bluetooth pairing mode. Pairing mode is active when the LED blinks blue and the voice prompts says "Bluetooth pairing". ​ ​Go to your device Bluetooth settings, search, and connect

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

Cloud III S Wireless Quick Start Guide

Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

Status LED Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds Power Button Power on / off - Hold button for 2 seconds to power headset on / off. Battery level

HyperX Cloud III S Wireless User Manual