Cloud Flight 2 - Instant Pair with an OMEN Gaming Laptop

Power on the gaming laptop.

Locate the Wireless Module.

1. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel.

2. ​

Set the Headset to Adapter Mode.

1. Slide the connection mode switch on the headset to WiFi symbol. With the headset in adapter mode, hold down the power button to power it on (Searching Mode).

   Note: The headset does not need to be in pairing mode for this step.

Position the headset.

1. Place the headset within 20 centimeters (8 inches) of the OMEN laptop.

Wait for Automatic Pairing.

1. The headset should automatically pair with the laptop within a few seconds.

2. If pairing does not occur:

   1. Turn the headset off, then back on while keeping it close to the laptop.

   2. Ensure the laptop is powered on and not in sleep mode.

   3. Confirm the headset is sufficiently charged.

   4. Unplug the USB wireless dongle if the headset is connecting to the dongle instead of the laptop.

3. ​

Confirm the Connection

1. Listen for a confirmation tone or check the LED indicator on the headset.

2. To verify, play audio on the laptop and confirm it is routed through the headset.

​NOTES:

1. After completing Instant Pair, the headset will default to the Instant Pair connection in adapter mode.

2. After completing Instant Pair, double press the power button to switch between OMEN gaming laptop connection or the USB wireless dongle connection.