Pulsefire Haste 3 Series

Connect the mouse to a PC or game console using the included USB cable. When the battery level drops below 10%, the mouse wheel blinks red. When it's less than 5%, the LED turns off. *USB connectivity will override the selected power mode.

Hold the left click button, right click button, and DPI buttons simultaneously until the mouse LED flashed blue.

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button E. Back Button F. USB-C Port G. Premium Glass Skates H. HyperX Performance Sensor I. Power Mode Switch J. DPI Button K. Grip Tape L. Extra Mouse Skates M. 8K Wireless Desktop Dongle N. USB Charge/ Data Cable

Switch the mouse to 2.4G opwer mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For omtimal placement, keep the wireless desktop dongle within 20cm of the mouse.

HyperX Pulsefire Haste 3 Pro Wireless Quick Start Guide

HyperX Pulsefire Haste 3 Quick Start Guide

The default polling rate is 1K Power OFF the mouse completely. Press and hold the DPI button. While holding the DPI button, switch the mouse to 2.4G mode. Repeat cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz (Magenta

Plug the USB cable into the mouse and PC

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI