Clutch Gladiate Family

No. There is no software support for Clutch Gladiate RGB.

Clean the controller surface with a lightly damp, microfiber cloth.

Controller Specifications Connection Type: Wired Compatibility: Xbox Series X|S, Xbox One, PC Inputs: USB-C, Mic (3.5mm stereo headset jack) Outputs: Headphones (3.5mm stereo headset jack) Physical Specifications (Metric/Imperial) Length: 155mm / 6.10in Width: 110.56mm / 4.35in Height: 64.68mm / 2.5

Ensure the Gladiate Xbox Controller is not connected to your device. Wipe gently with a slightly damp, soft cloth (e.g., Microfiber cloth).

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 buttons M. 3.5mm headset jack N. Triggers (LT/RT) O. USB-C port P. USB-C to USB-A Cable

Programmable ButtonsAssign/Re-Assign P2 & P3 Hold P1 and Release when LED is slowly flashing ​​ ​ When LED is flashing slowly, press one of the following buttons to assign. ​ ​​ ​ When LED is flashing rapidly, press either P2 or P3 to assign your selected button. ​ ​ Clear individually P2 or P3 When

No, these are standard potentiometer based Analog Sticks and Triggers.

HyperX Clutch Gladiate RGB Programmable Buttons Assign P2 / P3 Hold P1 and Release when Power LED is slowly flashing While the Power LED is flashing slowly, press one of the following buttons to assign. Clear P2 / P3 Hold P1 and Release when the Power LED is slowly flashing. Press either P2 or P3 to

Yes you can use multiple Clutch Gladiate RGB.

Yes. The button mappings will be saved and can be carried over to another system.