Cloud Stinger 3 Wireless

Go to the home page and select Settings > Sound Microphone •Input Device: USB Headset “HyperX Cloud Stinger 3 Wireless” Audio Output •Output Device: USB Headset “HyperX Cloud Stinger 3 Wireless” •Output to Headphones: All Audio

Slide the Wireless mode switch to the Bluetooth symbol Press and hold both the power button and the multifunction buttons for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud

Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Scroll wheel up or down to adjust volume level

Right-click on the speaker icon in the system tray and select Sound Settings Set the output device to headhpones (HyperX Cloud Stinger 3 Wireless) Set the input device to microphone (HyperX Cloud Stinger 3 Wireless)

Adapter Mode Pairing - Fast Blinking White Searching - Blinking White Connected - Solid-fade White for 5 seconds Bluetooth Mode Pairing - Fast Blinking Blue Searching - Blinking Blue Connected - Solid-Fade Blue for 5 seconds

Battery Level Status - Press Power Button to check the battery level The Status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

HyperX Cloud Stinger 3 Wireless Quick Start Guide

A. Swivel-To-Mute Microphone B. Status LED C. Power Button D. USB-C Charge Port E. Multifunction Button F. Volume Wheel G. Wireless Mode Switch H. USB Wireless Dongle I. Dongle Status LED J. Pairing Pin Hole K. USB-C to USB-A Adapter L. USB-C Charge Cable

Slide the headset wireless mode switch to the adapter symbol Connect the USB Wireless dongle to your device Power ON the headset