Cloud III Wireless

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”

Cloud III Wireless User Manual

Status LED ​

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

Cloud III Wireless Quick Start Guide

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

Volume Wheel Scroll up and down to adjust the volume level.