생쥐

Switch between 1000Hz (default) and 8000Hz polling rate. 1. Hold down the DPI Button. 2. While holding down the DPI button, Connect the mouse to a computer. 3. Continue holding the DPI button until either color (see table below) appears on the mouse wheel. 4. Release the DPI button. The LED will bli

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Keep the USB wireless dongle within 20cm of the mouse for optimal placement Bluetooth Mode 1.

To get the best experience, we recommend fully charging your mouse before its first use. Simply connect it to your PC or game console with the included USB cable. When connected via USB, the selected power mode will be overridden. The battery can last up to 120 hours*. However, Keep an eye on the ba

Mouse Specifications Shape - Symmetrical Sensor - HyperX 26K Sensor Resolution - Up to 26000 DPI DPI Presets - 400 / 800 / 1600 / 3200 DPI Speed - 650 IPS Acceleration - 50G Buttons - 6 Left / Right Button - HyperX Switches Left / Right Button Durability - 100 million clicks Light Effects - Per-LED

The default polling rate is 1k Power off the mouse completely. Press and hold the DPI button. While holding down the DPI button, switch the mouse to 2.4G mode. Repeat the cycle to the next polling rate; the wheel LED fast blinks twice. There are 3 default presets: 1000Hz (White) 4000Hz (Cyan) 8000Hz

Specifications: Mouse Ergonomic: Symmetrical Sensor: Pixart 3327 Resolution: Up to 6,200 DPI DPI presets*: (4) total 800/1600/2400/3200 DPI Speed: 220 IPS Acceleration: 30G Buttons: 7 Left/right button switches: Omron Left/right button durability: 20 million clicks Backlight: RGB (16,777,216 colours

Restart Mouse Power In-case mouse is non-responsive and can’t be powered off normally, with a small tool, press restart button underneath mouse to restart mouse power. ​

A. Left-click button B. Right-click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. USB-C port H. HyperX 26K Sensor I. Power mode switch J. USB wireless dongle storage K. Grip tape L. Mouse skates M. USB wireless dongle N. Extension adapter O. USB charge/data cable

Mouse Factory Reset If you are experiencing any issue with the mouse you can perform a factory reset. You will lose your custom LED profile and DPI presets by doing this. ​ Press and hold the DPI button + Mouse Wheel click for 5 to10 seconds ​

Pulsefire Haste 2 Wireless Pairing Tool