Content Creation

Setting Up With PC Optional: to enable Audio Mixer's ASIO low latency support, please download and install the Audio Mixer drivers from the HyperX support site. Upon first connection, Windows will usually set the Audio Mixer as the default device for playback and recording. If these settings are cha

A. 48V Phantom Power Button B. XLR 1/4" Microphone Gain Control C. 3.5mm Microphone Gain Control D. 3.5mm Line-in gain Control E. XLR 1/4" Clip Indicator F. XLR 1/4" Signal Indicator G. XLR 1/4" Mute Button H. 3.5mm Microphone Mute Button I. 3.5mm Line-in Mute Button J. Input VU Meter K. Line-Out Vo

Controls and Indicators48V Phantom Power Button Push the button to toggle 48V phantom power for the XLR microphone input on or off, indicated by the 48V LED. To prevent hearing a loud pop, the XLR microphone input will mute briefly when phantom power is turned off. XLR / 1/4" Microphone, 3.5mm Micro

*Microphone and interface not included.

HyperX Vision S User Manual

The part number / SKU is highlighted in the image below. The product info sticker shown is on the underside of the audio mixer.

Why can I not enable 4K resolution on my webcam? Please use the USB-C to USB-A 3.0 cable that is provided in the packaging. You must pair the HyperX Vision S to a USB 3.0 port with that specific cable type to fully utilize the 4K resolution. If the user decides to use a 3rd party cable, you must ver

HyperX Vision S Quick Start Guide

The product model/number can be found on the underside the top camera base swivel, which would normally make contact with the surface on which the camera is mounted. Other product information is also visible in the same area. Please see the reference photo specifically identifying where the part num

HyperX XLR Cable Quick Start Guide