Cloud Alpha Family

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph

Slide the wireless mode switch to Dual mode. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Alpha 2 Wir

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Mic mute / mic monitoring button Press the mic mute/mic monitoring button to toggle mic mute on or off. LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on or off. Headset volume buttons Press the volume +/- buttons to adjust headset master volume up or

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Alpha Wireless” and click on the Set Default button. 5. Under the Recordi

A. Line out / headset mode switch: Switch audio between 3.5mm line out or headset. B. Volume wheel: Rotate wheel to adjust playback volume level. C. Mic mute: Press button to toggle mic mute on / off. D. Buttons Mic gain: Rotate wheel to adjust mic gain level. Game / Chat mix: Rotate wheel to adjust

Use cable to connect the headset and devices directly with 3.5mm jacks.

The Cloud Alpha Wireless comes with dynamic, 50mm with neodymium magnets.