HyperX Pulsefire Haste 2 Wireless Installation
محدث
Charging
It is recommended to fully charge your mouse before first use. The mouse is charged via USB-C, located at the top of the mouse. While plugged in, the mouse will operate in wired mode.
2.4G Wireless Mode
1. Switch the mouse to 2.4G power mode.
2. Connect the USB dongle to the USB adapter.
3. Connect the USB adapter to a PC or game console using the included USB cable.
For an optimal connection, keep the USB adapter within 20cm of the mouse. While in 2.4G Mode, Battery percentage can be found within HyperX NGENUITY software.
Bluetooth Mode
Upon first use, Haste 2 Wireless should be in Bluetooth Pairing Mode when switched to BT Power
1. Switch the mouse to Bluetooth power mode (Mouse will flash blue on first setup).
2. Go to your computer’s Bluetooth settings, search, and connect to “Haste 2 Wireless”. While in BT Mode, the Battery percentage can be found within Windows Bluetooth Settings.
Bluetooth Pairing
To place Pulsefire Haste 2 Wireless into Bluetooth Pairing Mode:
1. Turn Mouse power switch to “BT”
2. Hold the left mouse button, right mouse button, and DPI button simultaneously until the mouse flashes blue.
3. The Scroll wheel will flash Blue, indicating it is in Pairing Mode.
Pairing Mode will automatically turn off after 30 seconds.
The mouse may only be paired with one other device at a time
Windows 10 – Manual Pairing
1. Place the mouse into Pairing Mode
2. Navigate to Start Menu -> Settings -> Devices -> Bluetooth & Other Devices
3. Click “Add Bluetooth or other devices”
4. Click “Bluetooth”
5. Click “Haste 2 Wireless” to connect
Windows 11 – Manual Pairing
1. Place the mouse into Pairing Mode
2. Navigate to Start Menu -> Settings -> Devices -> Bluetooth & Other Devices
3. Click “Add device”
4. Click “Bluetooth”
5. Click “Haste 2 Wireless” to connect Wired Mode Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode and take over as primary connection.
Wired Mode
Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode and take over as the primary connection.
